Marshalls Automotive: Brakes

Hitting The Brakes In Redmond

Safety should always be an essential element of your car care. So even if you don’t care about how your car looks, you should practice preventive maintenance to protect yourself — and other Redmond motorists — on the road. And good safety starts with good brakes.

Brakes need a regular inspection. There are important parts that wear out or wear down, and it’s best to replace them before you have issues.

Of course, if you are having trouble with your brakes, NOW is the time to fix them. If your brake warning light is on, that’s a good sign that you need your brakes checked. Redmond motorists can also tell something is wrong with their brakes by the feel of the pedal or unusual sounds while braking. If the brake pedal is low, feels spongy when you press it or is hard to push, that indicates a problem with your brakes. If you hear squealing, grinding or clunking noises when you brake, that can also indicate issues. If vibrations accompany braking, then it is critical to get your brakes checked.

Brakes come in two basic types. With disk brakes, a rotor is attached to the axle of the vehicle. Padded calipers straddle the rotor, which close when the brakes are applied. The resulting friction causes the rotor — and the axle — to stop turning. With drum brakes, brake pads (also called shoes) press against the inside of a drum to create friction and stop the drum, and hence the vehicle’s wheels, from turning.

When Marshalls Automotive services your brake system, your honest technician checks all of the brake pads for wear. If they are too thin, they need to be replaced. This is an inexpensive repair at Marshalls Automotive compared to what procrastination will cost you. If pads wear away completely, then the rotors and drums can be damaged. They will have to be either resurfaced or replaced, and that can be expensive. But if your vehicle brake pads are worn out, then your brakes are compromised and your stopping power is greatly reduced. You could easily wind up in an accident.

Brake pads come in several different grades such as regular, metallic and ceramic. The higher grades are more expensive in Redmond, but they also work better. Oregon car owners who want better and smoother braking, should consider upgrading. However, Bend drivers should NEVER use a brake pad that is lower than your auto maker’s recommendation.

After you your brake pads are checked at Marshalls Automotive, it’s vital to have your brake fluid checked. This is a critical element in your brake system. When you press your brake pedal, you are compressing the brake fluid, creating pressure that activates the brake pads. If your fluid pressure is low, it will cut down your braking power. The pads just won’t be able to press hard enough against the rotor or drum to stop your vehicle. Just as with worn pads, insufficient brake fluid can lead to a harmful and costly accident in Redmond.

Water can build up in your brake fluid, which can cause dangerous corrosion in your braking system. Eventually this can cause your brake fluid to leak. So Redmond motorists should also change their brake fluid periodically. Your vehicle owner’s manual will have guidelines on how often it should be replaced or ask a honest service professional at Marshalls Automotive. We have been servicing brake systems in Redmond for 25 years. 

Remember, Bend folks, safety first. It’s vital auto advice for all Redmond car owners on the road. You’re not just protecting others; you’re protecting yourself.

Put On The Brakes: Brake Service At Marshalls Automotive

When it comes to preventive maintenance and car care, most Redmond car owners know how essential it is to check their brakes. But brakes are more than just brake pads and shoes. There are a lot of components in the brake system, and they all need to be in good working order.

The pads and shoes are known as the friction materials in the brake system. They push together, providing friction, which stops the vehicle. It’s no wonder they have to be checked regularly for wear, and that brake pads and shoes need to be replaced periodically.

Brake pads/shoes gradually wear out, but that doesn’t mean your braking gradually becomes less effective. The pads are engineered so that they maintain good braking until they wear too thin to provide adequate friction. At this point, they need to be replaced.

But your braking system also has mechanical parts. These pistons and springs can also gradually wear out or get gummed up by oil, dirt and other road spatter. A brake inspection in Redmond at Marshalls Automotive includes a check of these parts as well as the pads and shoes. Your honest Marshalls Automotive technician can then advise you of any parts that need cleaning or replacement.

The fluid component to the brake system needs a regular check-up at Marshalls Automotive as well. The brake fluid cools and protects your brake system. Protective additives are gradually depleted by the operation of the brake system, and moisture build-up inside the fluid can diminish its effectiveness. When you have your brakes serviced at Marshalls Automotive in Redmond, the fluid should be checked and, if needed, replaced, which will clean out water, debris and dirt.

It is critical to remember that your brake system also includes your tires. No matter how well your brake system is performing, if your vehicle tires are worn, you won’t get good stopping power. Traction is the gripping power of your tires to the roadway. Traction is always better on tires with a good tread. Good traction translates to good braking.

This is particularly critical on wet Bend roads. A good tire will give you good braking on either wet Oregon roads or dry. But stopping distance increases dramatically when worn tires meet wet roads. Tread on a tire acts to channel away water as the vehicle passes over the wet road, thus maintaining contact between the tire’s surface and the road, which maintains traction. But the thinner the tread, the less effective the water channels become, and water can get between the tire and the roadway, reducing friction. A loss of friction means a longer stopping distance and possibly the loss of control.

Braking depends on two things: the weight of your vehicle and the speed of the vehicle. The heavier the vehicle or the faster the vehicle, the more braking power it requires. Thus, brake systems vary from vehicle to vehicle. For example, a pickup that is designed for heavy loads has a more powerful braking system than a compact car. Sports cars also have higher-grade braking systems than minivans.

Regardless of what kind of car you drive in Redmond, it is always good auto advice to keep your brake system in good repair, and that means ALL of your brake system. Just one more way to keep your travels accident and worry-free.

Stop It! You Need Good Brakes

Good brakes are obviously very important. If you’ve ever had your brakes go out while you’re driving around the Bend area, you’ll know how terrifying it can be. Today we’ll focus on how to tell when you have a brake problem, and how to make good repair choices.

Often, the first indication that something’s wrong with the brakes is an unusual sound. It could be a squeal, chatter or grinding sound.

Some brake pads have a little piece of metal embedded in them that will make a squeal or chirping sound when the brake pads have been worn down to the point that they need to be replaced. It’s an early warning indicator.

When you hear that sound, schedule an appointment at Marshalls Automotive soon.

Now a chattering sound is more urgent. That usually indicates that something is loose. It could be a brake pad or even the brake calipers. If one of those parts falls off, you could have some serious trouble stopping the vehicle. It would be a good idea to park it until you can get into the shop.

A grinding noise usually means that the brake pad is completely worn away and the metal parts of the brake are rubbing directly on the metal brake rotor. That means the rotor is being damaged and will need some work. More on that later.

Another warning sign is that your brake pedal may feel soft and spongy – or it may even feel very hard to push in. Both could mean trouble. And of course, you may get a dashboard brake warning light.

Now when it comes time to replace your brake pads, you have a choice to make. You can get the same pads that came standard on your vehicle. You can expect the same performance and durability as with the pads that came on the car from the factory.

Now you can also get a budget brake pad. Sometimes drivers insist on lower cost pads. That’s OK if the budget demands it, but you need to be aware of the trade offs. Lower grade pads are usually noisier, so you’ll have to live with more noise when you apply the brakes. They also tend to generate a lot more brake dust, you know, that black dust that accumulates on your wheels. And they probably won’t last as long either. In our opinion, that’s a lot of compromise for just a few dollars in savings.

You can also choose to buy premium brakes pads. These perform at higher specifications than the factory pads. You can expect quieter operation, less brake dust and better stopping power.

Now, getting back to the rotors. The rotors are the discs that the brake pads clamp down on to stop the vehicle. If you’ve been driving with completely worn brake pads, you’ve scratched grooves into the rotors. If the grooves aren’t too deep, the rotor can be resurfaced. A thin layer of metal is cut off the surface of the rotor to make it smooth again.

Now, if the grooves are too deep or if the rotor has already be resurfaced before, there may not be enough material to resurface and still have a rotor that’s thick enough to safely stop the vehicle. In that case, the rotor will have to be replaced.

Something that’s often overlooked is the brake fluid. Your manufacturer has a recommended schedule for evacuating the old brake fluid, cleaning the system and refilling it with fresh brake fluid. This is really important to brake performance.

So here’s the bottom line: if you suspect, inspect. If you notice any of these warning signs, have your brakes inspected. Your advisor can help you make the repair decision that’s right for you.

Hitting The Brakes In Terrebonne

Hello Redmond, let’s talk about brakes. Braking, as all Oregon car owners know, is slowing or stopping your vehicle. As you can imagine, brakes are engineered to work well on a particular vehicle application. For example, you would expect more powerful brakes on a heavy-duty pickup that routinely hauls big loads and pulls trailers, than you would on a compact car. And a Corvette that can go over 180 miles per hour would have much different braking needs than the family mini-van you drive around between Redmond, Bend and Terrebonne.

But the mechanical aspects of the brakes themselves are just one issue. There’s also the power brake pump and brake fluid. And then there are the tires, which are critical to the effectiveness of the brakes.

Let’s step back. A new vehicle or truck rolls off a local Redmond showroom floor. It has brand new brakes with brand new brake pads. The brake lines and pump are filled with fresh fluid and are completely clean inside. And the tires are brand new, with full tread. It is ready to go.

Naturally, braking power is at its peak performance. Now the miles start to add up on the vehicle. Redmond car owners tend to focus on the brake pads. In the automotive business, the pads, and shoes on drum brakes, are called the friction material. That’s because they provide the friction used to stop the vehicle. The pads are designed to be effective throughout their useful life – it’s not until they are worn so thin as to be out of auto makers’ specs that they lose their ability to stop.

The mechanical parts of the brakes have pistons and springs that get quite a workout while breaking. Over many miles around Oregon, these wear and get gummed up. They start to lose effectiveness gradually and could even fail – a scary possibility That’s why a regular brake inspection at Marshalls Automotive is important for your vehicle and your family’s safety. At Marshalls Automotive we can test the operation of the brakes and see if any parts need cleaning or replacing.

That leads us to brake fluid service at Marshalls Automotive. Some of the critical additives in the fluid that lubricate and clean the vehicle fluid system are depleted over time. That and moisture building up in the system reduce the performance of the brake fluid. A brake service at Marshalls Automotive cleans out deposits, water and dirt. Then the system is filled up with fresh fluid.

The tires are what connect the vehicle to the road. Stopping force all comes down to traction. The better the tires grip the road, the quicker you’ll stop.

This is especially important on wet Bend area interstates and surface streets. Studies have shown that wet stopping distance increases significantly as tires wear down. Oregon car owners need to understand that they can have brakes that are operating at peak efficiency and yet still be in danger because their tires are worn out.

Brake Service

Brakes really aren’t optional equipment. And taking care of them isn’t optional either.

A regular brake inspection is on every car’s maintenance schedule. An inspection will check your brake system and let you know if there are any problems. Of course, if you’re having trouble with your brakes, get your car into a Redmond or Bend service center right away. And watch out for these problems:

• Low or spongy brake pedal
• Hard brake pedal
• A brake warning light that stays on
• Constantly squealing or grinding brakes
• Vibrations or clunking sounds when you apply your brakes

There are two types of brakes: disc and drum. Disc brakes have a rotor that’s attached to the axle. Calipers straddle the rotor, kind of like the brakes on a bicycle. Drum brakes are more common on back wheels. Pads, called shoes, push against the inside of the drum to slow the vehicle.

There are several things that need to be serviced on the brake system. First, the brake pads and shoes wear out with use, and become too thin to really help. If the brake pads wear away completely you can damage the rotors. The calipers can grind grooves in the rotor. Then the rotor must either be resurfaced or replaced and that can be expensive. But putting it off is dangerous because your vehicle won’t stop as quickly. Sometimes rotors warp or crack and must be replaced.

Brake fluid is also important. When the brakes are applied, the pressure in the fluid activates the brake pads or shoes. Not enough fluid, not enough pressure to brake properly. Also, water builds up in the brake fluid over time, which leads to corrosion, leaks and brake damage, and with hard use, the brakes could severely fade or even fail. You should change the brake fluid when your manufacturer recommends it.

There are different grades of brake pads. There are regular, metallic and ceramic – higher grades cost more, but give better braking performance and smoother operation. It’s OK to upgrade your brake pads. But, never use a grade that’s lower than what the manufacturer recommends.

Be sure to properly maintain your brakes because it’s a lot cheaper than paying your nearest Bend area body shop after an accident.